b'Torque Anchor Transitions & Wall PlatesTransition Assemblies Stamped Wall PlatesTAT-150 TAT-150-HD TAT-175-HD TAT-200 PA-LWPOutput Thd. Output Thd. Output Thd. Output Thd. 12 x 26 -2.2 ft 2BearingMajor Dia. Major Dia. Major Dia. Major Dia.1 (B-12 Coil 1-1/8 (WF-8) 1-3/8 1-7/16TAT-150 Rod) (WF-10)(R71-10) Wall Plates include:Flat Washer 3/16x4x6Plate Washer Plate Washer Plate Washer Plate Washer Clamping Cap: 8,250 lb.3/8 x 5 x 5 3/8 x 5 x 5 3/8 x 6 x 6 Not Supplied Hot Dip Galvanize.Ultimate-Limit Ultimate-Limit Ultimate-Limit Ultimate-LimitCapacity Capacity Capacity CapacityTAT-150-HD 38,000 lb. 70,000 lb. 99,000 lb. 155,000 lb. .TAT-175-HDTAT-288L TAT-288 TAT-350 TAT-450 Transition Notes:1.Transitionslistedarestandarditems;Output Thd. Output Thd. Output Thd. Output Thd. usually available from stock.Major Dia. Major Dia. Major Dia. Major Dia. 2. Hot dip galvanized per ASTM A123 Grade1-3/8 1-3/8 1-3/8 1-1/2 75TAT-200 (WF-10) (WF-10) (WF-10) (WF-11) 3.Thecapacitieslistedaremechanicalratings.Plate Washer Not Supplied with these Transitions. 4. All Transitions are supplied with 48 AllOrder Separately tothe Engineers Specifications Thread Rod. (All thread coil rod supplied onTAT-150 assembly is 22 long.),Ultimate-Limit Ultimate- Ultimate- Ultimate-Limit 5.All Transitions are supplied with Nut andTAT-288L - TAT 288 Capacity Limit Limit Capacity Mounting Hardware. Square shaft transitionsTAT-350 TAT-450 60,000 lb. Capacity Capacity 140,000 lb. have a flat washer included. (No flat washer100,000 lb. 120,000 lb. supplied with the TAT-200 Transition Kit.)The sketch to the right shows the components that are PLATE WASHERshippedwithsolidbartransitionassemblies.Thetransitionandthehardwarerequiredtoattachthetransition to the tieback will vary depending upon the MOUNTING HARDWAREproduct ordered. Please refer to the table above foradditional details. Tubular transitions and TAT-200 do TIEBACK NUTnot include a flat wall plate. As the angle of installationusuallyvariesgenerallyfrom15to30,bevelwashers should be ordered separately.ALL THREAD BAR x 22" LONG(TAT-150 Sketch ShownOther Transition Assembliesare similar)TRANSITIONPart Number Description Ultimate Limit Capacity Bundle WeightTension QuantityTAT-150 Transition Kit 150 With 22" 1" Coil Rod 38,000 lbs 16 lbsTAT-150-HD Transition Kit HD 150 With 48" WF8 70,000 lbs 26 lbsTAT-175-HD Transition Kit 175 With 48" WF10 99,000 lbs 41 lbsTAT-200 Transition Kit 200 With 48" R71-10 150,000 lbs 5 Sets 41 lbsTAT-288L Transition Kit 288 LWith 48" WF8 60,000 lbs 18 lbsTAT-288 Transition Kit 288With48" WF10 100,000 lbs 31 lbsTAT-350 Transition Kit 350 With 48" WF10 120,000 lbs 33 lbsTAT-450 Transition Kit 450 With 48" WF11 140,000 lbs 45 lbsECP Helical Torque Anchors Technical Service Manual2021 Earth Contact Products, L.L.C.2021-09 Chapter 1 - Page 15 All rights reserved'