Eccentric Piers
Steel Push Piers
ECP steel push piers are the most common foundation repair product used today. And when it comes to foundation repair, Earth Contact Products (ECP) is “The Very Best” manufacturer in the industry. The patented ECP Steel Pier is the standard for all piering methods in the foundation repair industry and the top choice for professional foundation repair contractors.
- Standard Lift – 4″
- Fully Adjustable Unlimited Lift Capability
- Installs From Outside or Inside Structure
- Friction Reduction Collar on Lead Pier Section
- Installs With Portable Equipment
- Installed With Little or No Vibration
- Installs To Rock or Verified Load Bearing Stratum
- 100% of Piers Field Load Tested During Installation
- 25 Year Manufacturer’s Warranty
Concentric Piers
ECP’s Concentric Pier system is the only engineer-approved system that eliminates bottle jacks and shims from the lifting process. This unique design assures that the pier will provide many years of structural support without over lifting. Read more about our Concentric Piers.
- Standard Lift – 4″
- Fully Adjustable Unlimited Lift Capability
- Installs From Outside or Inside Structure
- Friction Reduction Collar on Lead Pier Section
- 2-7/8″ Dia. High Strength, Galvanized Tubular Pier
- Installs With Portable Equipment
- Installed With Little or No Vibration
- Installs To Rock or Verified Load Bearing Stratum
- 100% of Piers Field Load Tested During Installation
- 25 Year Manufacturer’s Warranty
Crawl Space Repair
Crawl Space Jack
ECP’s PPB-103 and PPB-107 crawlspace support jacks are designed to provide positive support to sagging floors above crawlspaces and to help remove the bouncing or squeaking caused by inadequate support. This supplemental support system has an ultimate capacity of 60,000 .lbs and is used where existing column supports have failed or settled.
- Quick to Install
- Positive Support System
- Economical
- Easily used in conjunction with crawlspace encapsulation
- Zinc Corrosion Protected
- 60,000 lb Ultimate Capacity
Micropile
PPB-350MP
ECP’s PPB-350MP Micropier Bracket System is easily installed into difficult soil conditions that can contain large cobbles, obstructions and bedrock. The TEI / MP-250 Drill Rig that is used in conjunction with the ECP Micro Pier Bracket System is a lightweight and portable drilling unit and used worldwide in the pier installation industry. With its proven track record, you’ll find that the installation and drilling of the Micropile is fast and efficient. With its grouted column, lateral loading in suspect soils is no longer a problem.
- Bracket is a pre-engineered and pre-tested product
- Capacity ratings of 75,000-99,000 lbs
- Quickly Installs to the TEI Drill Rig MP-250
- Intregrated Manifold Lift Design
- Minimal Site Preparation
- Installs in Low Head Room or Limited Access Areas
- System Handles Difficult Ground Conditions
- Easily Load Tested to Verify Capacity
- Designed to Transfer Load to the Full Length of the Pile
- Cost Effective due to ease of operation and design
- 25 Year Manufacturer’s Warranty